Barrier card SRC RP302

تماس بگیرید

Barrier card SRC RP302

تکرار کننده سیگنال برای پروتوکول Fieldbus برای بازه گسترده ای از تجهیزات ابزار دقیق از جمله پوزیشنرها و دیگر کاربردها است.

Compatible with IEC 61158-2, 31.25 kb/s, FOUNDATION Fieldbus H1, and Profibus PA
Allow extension of the network length beyond the 1900m Fieldbus specification.
Built-in terminators jumper selectable on both sides.
Low leakage current ( < 1 uAdc ) will not interfere with network power.
Galvanic isolation between networks will block noise-jitter propagation.
Small size and light weight enclosure for DIN mounting rail.

Technical Characteristics
* Complies with the IEC61158-2 Physical Layer definition for Fieldbus.
** Applies only to networks wired in series.
Power
Power Supply (Input)
Voltage: 24Vdc ± 5%
Current (max.): 30mA at 24 Vdc
Internal Dissipation: 0.72W max. at 24V
input
Limitations
Cable length*: 1900 meters per Fieldbus
network segment
Number of devices*: 2 – 12 per network
segment
Number of Repeaters per H1 Fieldbus
network trunk or spur** :
8 bit preamble: 4
16 bit preamble: 8 repeaters
Power
*Power Supply (Input):
Voltage: 24Vdc ± 5%
Current (max.): 30mA at 24 Vdc
*Internal Dissipation:
0.72W max. at 24V input
Limitations
Cable length:
1900 meters per Fieldbus network
segment
Number of devices:
2 – 12 per network segment
Number of Repeaters*:
(per H1 Fieldbus network trunk or spur)
8 bit preamble: 4
16 bit preamble: 8 repeaters
Digital Signal Transmission:
31.25 kbit/second.
*Fuse:
Power Supply: 250 mA
Fieldbus Inputs: 100 mA
*Terminals : Conductors up to 4mm2
(12AWG)
*Isolation:
250 Vac between input, output, and
power supply terminals.
Factory tested to 1500V rms
minimum
Physical
*Ambient Temperature Range:
-20º to +60º C (continuous operation)
-40º to +80º C (storage/off line)
*Humidity:
5% to 95% relative humidity
*Mounting:
Fast snap-on to DIN mounting rail
Corner screw mounts (flush)

برای خرید و مشاوره در مورد این محصول میتوانید با شماره

۰۲۱-۷۷۵۰-۲۳۳۰

تماس بگیرید

توضیحات محصول

Barrier card SRC RP302

تکرار کننده سیگنال برای پروتوکول Fieldbus برای بازه گسترده ای از تجهیزات ابزار دقیق از جمله پوزیشنرها و دیگر کاربردها است.

Compatible with IEC 61158-2, 31.25 kb/s, FOUNDATION Fieldbus H1, and Profibus PA
Allow extension of the network length beyond the 1900m Fieldbus specification.
Built-in terminators jumper selectable on both sides.
Low leakage current ( < 1 uAdc ) will not interfere with network power.
Galvanic isolation between networks will block noise-jitter propagation.
Small size and light weight enclosure for DIN mounting rail.

Technical Characteristics
* Complies with the IEC61158-2 Physical Layer definition for Fieldbus.
** Applies only to networks wired in series.
Power
Power Supply (Input)
Voltage: 24Vdc ± ۵%
Current (max.): 30mA at 24 Vdc
Internal Dissipation: 0.72W max. at 24V
input
Limitations
Cable length*: 1900 meters per Fieldbus
network segment
Number of devices*: 2 – 12 per network
segment
Number of Repeaters per H1 Fieldbus
network trunk or spur** :
۸ bit preamble: 4
۱۶ bit preamble: 8 repeaters
Power
*Power Supply (Input):
Voltage: 24Vdc ± ۵%
Current (max.): 30mA at 24 Vdc
*Internal Dissipation:
۰.۷۲W max. at 24V input
Limitations
Cable length:
۱۹۰۰ meters per Fieldbus network
segment
Number of devices:
۲ – ۱۲ per network segment
Number of Repeaters*:
(per H1 Fieldbus network trunk or spur)
۸ bit preamble: 4
۱۶ bit preamble: 8 repeaters
Digital Signal Transmission:
۳۱.۲۵ kbit/second.
*Fuse:
Power Supply: 250 mA
Fieldbus Inputs: 100 mA
*Terminals : Conductors up to 4mm2
(۱۲AWG)
*Isolation:
۲۵۰ Vac between input, output, and
power supply terminals.
Factory tested to 1500V rms
minimum
Physical
*Ambient Temperature Range:
-۲۰º to +60º C (continuous operation)
-۴۰º to +80º C (storage/off line)
*Humidity:
۵% to 95% relative humidity
*Mounting:
Fast snap-on to DIN mounting rail
Corner screw mounts (flush)

برای خرید و مشاوره در مورد این محصول میتوانید با شماره

۰۲۱-۷۷۵۰-۲۳۳۰

تماس بگیرید

توضیحات تکمیلی

میزان گارانتی

: یک سال گارانتی

نقد و بررسی‌ها

هنوز بررسی‌ای ثبت نشده است.

اولین کسی باشید که دیدگاهی می نویسد “Barrier card SRC RP302”